KTM R14020 Manual Del Usuario página 4

1
2
3
4
5
4
Scope of delivery:
2x upper sliding bushings (1)
6
2x lower sliding bushings (2)
2x pilot bushings, piston rod d12 (3)
7
2x copper washers 20.5X26X1 (4)
copper washers 29.5x33.5x1
8
(EXC OC only instead of 48600275)
2x shaft seal rings 12MM (5)
2x oil seal rings D45 SKF (6)
9
2x dust boots DL D48 SKF (7)
2x lock rings SB58 (8)
2x support rings 50 X 57.6 X 1.5 (9)
10
2x piston rings 5x1x68 (10)
This work should be done by an authorized workshop or a qualified service
technician only!
NOTE:
The SXS chassis service kit can also be used for the series chassis.
NOTE:
The repair manual always applies to the respective vehicle model.
Assembly
- Remove the fork legs (see "Removing the fork legs" in the Repair Manual).
- Exchange the wear parts, see "Conducting minor fork service" or "Conducting
major fork service" in the Repair Manual.
- Install the fork legs (see "Installing the fork legs" in the Repair Manual).
48600428
48600429
48600430
48600275
48600004
48600829
48600969
48600968
48600070
48600013
48600455