Menu Function; Picture; Sound; Menu Operation - Nevir NVR-9002-32RD2S-SM Manual De Instrucciones

Chapter 3

Menu Function

This section explores the system settings menu of your
TV. Each menu is outlined and detailed to help you get
the most from your TV. Please note that some function
might be unavailable in certain input source. To access
the menu system:
1. Press on remote control to display the main
menu.
2. Press ▲/▼ to select Picture, Sound, Channel, Smart
TV, Network, System or Support, then press OK or
► to enter the submenu.
3. In the submenu, press ▲/▼ to select options, press
OK or ► to set functions or change values, press
OK to open the corresponding submenu or activate
a setting.
4. To return the previous menu, press
menu, press EXIT.

Picture

Picture preset
Picture
Backlight
Brightness

Sound

Contrast
Saturation
Channel
Tint
Sharpness
Smart TV
Color temperature
Overscan
Network
Micro Dimming
Advanced setting
System
Picture reset
Support
1. Press to display the main menu.
2. Press ▲/▼ to select Picture, then press OK or ► to
enter the submenu.
Picture preset
Adjusts the picture setting that best suits your viewing
environment.
Backlight
Adjusts the backlight levels of the picture.
Brightness
Adjusts the brightness of the picture.
Contrast
Adjusts the difference between the light and dark areas
of the picture.
Saturation
Adjusts the richness of color.
Tint
Adjusts the balance between the red and green levels.
Sharpness
Adjusts the crispness of the edges in the picture.
. To close the
Standard
>
100
50
100
60
50
50
Normal
>
On
>
Off
>
...
...
Color Temperature
Adjusts the color temperature of the picture.
Overscan
Selects On or Off to turn on/off this option.
Micro Dimming
Selects On or Off to turn on/off micro dimming.
Advanced Settings
Selects more picture advanced settings.
Picture reset
Restores the current picture settings to default.
Hotel mode
Find the Picture preset, chose Contrast, input by
remote 6405, then enter the Hotel mode menu.
Sound
Sound preset
Picture
100Hz
500Hz
Sound
1.5KHz
Channel 5KHz
10KHz
Smart TV
Balance
Auto volume control
Network
SPDIF type
SPDIF delay
System
Audio delay
TV placement
Support
Advanced settings
1. Press to display the main menu.
2. Press ▲/▼ to select Sound, then press OK or ► to
enter the submenu.
Sound preset
Selects a preset audio option optimized for different
sounding conditions.
Note: When Sound preset is set to different mode, five
Sound options (100 Hz, 500 Hz, 1.5 KHz, 5 KHz, and
10 KHz) will be adjusted, which enable you to adjust
the frequency levels desired. You can also set the
options to your desired levels.
Balance
Adjusts the amount of audio sent to the left and right
speakers.
Auto volume control
Selects On to reduce the annoying blasts in volume
during commercial breaks and also amplifies softer
sounds in program material. Eliminates the need to
constantly adjust the volume.
10

Menu Operation

Standard >
50
50
50
50
50
0
Off >
PCM >
0
0
Desk top >
...