Channel - Nevir NVR-9002-32RD2S-SM Manual De Instrucciones

Chapter 3
SPDIF type
This option is used to control the type of audio stream
sent to the Digital Audio Output (SPDIF) socket.
SPDIF delay
This option is used to synchronize the sound with the
picture. If the sound is slower/quicker than the action of
the picture, you can press ◄/► to adjust the numerical
value.
Audio delay
if the sound output does not match the picture, press
◄/► to adjust the delay time to synchronize the sound
with the picture.
TV placement
Selects Desk top or Wall mount mode.
Advanced Settings
Selects more sound advanced settings.

Channel

Channel scan
Picture
Channel list
Sound
EPG
Channel organizer
Channel
Channel diagnostics
Smart TV Timeshift
Subtitle
Network
Teletext
PVR
System
Support
1. Press to display the main menu.
2. Press ▲/▼ to select Channel, then press OK or ►
to enter the submenu.
Note: This function is only available in TV mode.
Channel scan
Allows you to scan for all available analog and digital
channels.
Channel List
Shows all the searched channel in a list.
EPG
Press OK/► to enter the Program Guide menu.
Channel organiser
This option allows you to organise channels.
Channel diagnostics (on digital TV channels)
Press OK/► to display some signal information
on current digital channel, such as signal strength,
Frequency, etc.
Timeshift
Note: This Option is only available when Timeshift
is set to On: In TV mode, press
Channel> Time Shift, press OK to enter and use ▲/▼
to set Timeshift to On or Off.
...
...
On
, select Settings>
11
Menu Operation
Allows you to pause, fast forward and rewind live TV,
so you don't have to miss any part of your favourite
programs.
Before you use the function, connect a USB drive to the
TV first. For the first time, you should complete the disk
setup for the USB drive.
Press on the remote control and select Timeshift,
then press OK to turn On. Follow on-screen instructions
to do the disk setup if you use timeshift for the first time.
After the disk setup is done, timeshift will start, and the
timeshift menu displays on the screen. For later use,
press and select Timeshift. Press OK to display the
time shiftmenu and operate according to the on-screen
prompt. Press OK to display the virtual keyboard.
Highlight ■ and press OK to stop the timeshift and
exit. When the timeshift menu disappears and only the
timing of the time shift remains on the screen, you can
press OK to call out the timeshift menu.
Notes:
Before you plug the USB drive to TV, make sure
you have backed up the data on the drive to avoid
unforeseen malfunction and data loss. We recommend
that you use a USB drive with at least 1GB free space
and a disk speed faster than 5.0MB/sec. The bigger
the USB drive free space for timeshift, the bigger the
recording length.
Subtitle
press OK/►to enter, press ▲/▼o turn On or Off the
subtitles. When Subtitle is set to On, you can enable
subtitle languages on digital TV channels.
- Digital subtitle language:
Press▲/▼to select Digital subtitle language. Press
OK/►to enter, press▲/▼to select a subtitle language
as your preferred language.
- Digital subtitle language 2nd:
Press ▲/▼ to select Digital subtitle language 2nd.
Press OK/►to enter, press▲/▼to select a secondary
subtitle language. Press
- Subtitle type:
Press OK/► to enter, press▲/▼to select a subtitle
type. You can select Hearing impaired to display the
hearing impaired subtitle with your selected language.
Teletext
Press OK/►to display its submenu.
Decoding page language:select a proper type of
language in which Teletext will display.
Digital teletext language: for digital TV channels, your
TV could zap to a service with multiple initial Teletext
pages in different languages. This function allows you
to select an available language as primary language
which relates to different initial Teletext page.
PVR
Press OK/►to open PVR.
to return to previous menu.