auna multimedia IR-120 Manual Del Usuario página 17

The screen above (left) will appear. You can choose Yes to proceed to search for the available WiFi network. If your
router has the WPS function, you can ENTER the "Yes[WPS]" to proceed. It will then start scanning the network. After
the search is done, it will display a list of the available router (above right).
Choose your router from the list, enter the WEP(Wired Equivalent Privacy) or WPA(Wi-Fi Protected Access) code. If your
network is not confi gured to be with the WEP or a WPA code, the unit will connect to the router automatically.
Note: The encryption code would have been set up by the person who set up and confi gured your network.
Please refer to the "Remote control character list" for you to enter the passwords. Press the RIGHT button to go to the
next word, press LEFT to delete the wrong word you have entered.
If you want to enter the passwords on the radio main unit, you can use the Volume Dial rotary knob. Follow the steps
below:
- Rotate the knob to ENTER the character
- Press the RIGHT button to go to the next entry
- After you fi nish the entries, push down the Rotary knob to confi rm.
The radio will start connecting to the network.
After the router is connected successfully, it will show "Network OK" and display the menu screen:
17