Technical Data; Safety Functions; Function Description; Important Usage Notes - therm-ic ThermicDryer Modo De Empleo

I NS TRUCTI ONS FO R USE / E NG LI SH
covered or dirty.
 If the cable or housing parts are damaged or if
the air intake or outlet openings are blocked or
damaged, send the unit to a dealer for repair.
 Repairs to electrical equipment may only be
carried out at specialised repair facilities. Impro-
per repair could create substantial danger for the
user.
 Never wind the power cable around the unit.
 When not in use store the unit folded and in a dry
place.
 Do not leave this device switched on while
unattended.

The unit must not be used for any purpose other
than that intended.
TE CHNI CA L DATA
230V version: 230V~ 50Hz 50W
120V version: 120V~ 60Hz 50W
S A F E TY F U N C TI O NS
 Overheating protection
 Temperature control
FUNCTION DESCRI PTION
 Dries completely soaked boots or gloves effi-
ciently in a few hours without damaging the mate-
rial.
 The air flowing from the nozzles in the shoe
reaches a temperature of approx. +20ºC above
room temperature.
 Collapses to a small size and is extremely quiet.
I MPO RTA NT USA G E NO TES
 Open the unit (1)
 Take out the tubes and point the nozzles in the
direction of the toe of the boot (in the maximum
position, the tubes can be locked) (2).
 Slide the tubes into the boot (3).
6