Warning: May Cause Property Damage Or Severe Injury; Warning: Explosion Or Fire; Warning: Electric, May Cause Property Damage, Severe Injury Or Loss Of Life; Warning: Do Not Try To Repair Or Disassemble The Heat Gun Yourself - Homeright C800950 Manual De Instrucciones

Temperatura doble pistola de calor
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

WARNING: MAY CAUSE PROPERTY DAMAGE
OR SEVERE INJURY
1. Keep Heat Gun out of the reach of children.
2. Do not touch the nozzle while Heat Gun is on.
Severe burns will result. Wear gloves to protect
hands.
3. Keep moveable items secured and steady while
scraping.
4. Make sure Heat Gun is cool before storing.
5. Do not leave the Heat Gun unattended. Turn off
and unplug if you leave the work area.
WARNING

•WARNING: EXPLOSION OR FIRE

This Heat Gun produces air at extremely high
temperatures (as high as 1100°F). Use it with
caution to prevent combustible material from
igniting.
1. Keep the Heat Gun in constant motion.
2. Be aware that heat from this tool could ignite
flammable materials in hidden areas such as
walls, ceilings, floors, soffit boards or behind
house siding. Check these areas before applying
heat and do not use if flammable materials are
present, or if you are not sure. The ignition of
these materials may not be readily apparent and
could result in property damage and personal
injury.
3. Do not use near surfaces with cracks or near
metal pipes or flashing.
4. Do not use electric tools with flammable
liquids or gases nearby.
5. Do not use near combustible materials such as
dry grass, leaves, and paper, which can scorch
and catch fire.
6. The nozzle becomes very hot. Do not lay the
Heat Gun on flammable surfaces while operating
or after immediately shutting off. Always set on
a flat, level surface so the nozzle tip is directed
upwards.
7. Do not use the Heat Gun as a hair dryer.
C800950 DUAL TEMPERATURE HEAT GUN
Important Safety Instructions
Do not touch nozzle
when working.
Severe burns will result.
WARNING: ELECTRIC. MAY CAUSE
PROPERTY DAMAGE, SEVERE INJURY OR LOSS
OF LIFE
1. Do not disassemble.
2. Do not work in wet areas or expose the Heat Gun
to rain. Do not immerse.
3. To guard against electric shock, do not have
bodily contact with grounded surfaces such as
pipes, ranges, radiators, aluminum ladders or
other grounded devices.
4. Do not carry by the cord. Inspect cord for wear
or damage.
5. Use only UL (CSA for Canada) listed extension
cords rated for outdoor use.
6. If your Heat Gun has a three-prong plug in, do
not remove grounding pin.
In Canada, an outlet adapter for a three-prong plug
may not be used. Use only a grounded
outlet with this unit.
WARNING: DO NOT TRY TO REPAIR OR
DISASSEMBLE THE Heat Gun YOURSELF
Repairs should be performed by a qualified shop
familiar with this tool, or return it to HomeRight.
(See warranty.) The warranty will be void if any
unauthorized person opens the tool.

WARNING: PROP 65 WARNING

Handling the coated electrical wires of this product
exposes you to lead, a chemical known to the
State of California to cause birth defects or other
reproductive harm. Wash hands after use.

EXTENSION CORDS

Use only a three-pronged extension cord that
has a three-blade grounding plug and a three-slot
receptacle that will accept the plug on the product.
Make sure your extension cord is UL/ETL/CSA
listed and is in good condition. When using an
extension cord, be sure to use one heavy enough
for the current. For lengths less than 18 feet, use
a No. 18 AWG or heavier; for lengths more than
18 feet but less than 25 feet, use No. 16 AWG;
for lengths more than 25 feet, use No. 14 AWG
or heavier. If in doubt, use a heavier gauge. An
undersized cord will cause a drop in line voltage
resulting in loss of power and overheating which
can damage the unit or extension cord.
ENGLISH 4

Publicidad

Tabla de contenido
loading

Tabla de contenido