Cd / Cd-G; Bt Connection; Usb Charging Port - auna StarMaker Manual Del Usuario

EN
16

CD / CD-G

• Load a CD, CD-R/RW, or CD+G disc into the karaoke machine, label side
facing up. Close the CD door.
• Press the CD/Bluetooth button to switch to CD+G mode (The CD
indicator will light up).
• Plug the included microphone into the Mic 1 or Mic 2 input.
• Press the Play/Pause button to begin playing the loaded disc.
Programming a Loaded Disc
• Press the Stop button to stop the playback.
• Press the Program button. Press the Skip/Search buttons to select a
track from the loaded disc.
• Press the Program button to add the selected track to the program.
• Repeat the above steps to add up to 20 tracks to the playlist.
• Press the Stop button to cancel a program.

BT CONNECTION

• Press the CD/BT button repeatedly to switch to BT mode - then press
the Pair button so the unit will enter pairing mode.
• Using the native controls on your BT device, select the "W-KG203" in
your BT settings to pair with.
• If your device requests a password, enter the default password "0000".
• When successfully paired and connected, the pairing indicator will
display a solid blue light.
• After initial pairing, the unit will stay paired unless unpaired manually
by the user or erased due to a reset of the device.
• If your device should become unpaired or above steps or press the Pair
button to start the pairing process pairing again.
• Use the native controls on the connected Bluetooth Device to select a
track.
• To play, pause or skip the selected track, use the native controls on
the connected Bluetooth Device or press the Play/Pause or Tun/Skip/
Search buttons.

USB CHARGING PORT

Use the appropriate USB charging cable (not included), connect one end to
the device and the other to the USB Charging Port on the unit. Make sure
the unit is plugged into the wall outlet.