Trimmer - Olympia Vario duplex 4000 Manual Del Usuario

Trimmer

Trimmer with integrated cut selector switch and setting lock.
Cutting functions:
1. Straight cut
2. Perforation
3. Wave cut
The blades are accommodated in a protected housing.
A spare blade is contained in the integrated storage compartment.
1 Place the cutting unit on a stable, level base with the trimmer side fac-
ing up.
2 Slide the cutting head to one side of the guide rail.
3 Place the material to be cut in the required position under the trans-
parent pressing rail and hold the material in place with one hand when
cutting.
Note: Hold the material to be cut securely, otherwise it could shift and
be cut inaccurately. The raster and measuring system on the trim-
mer's working surface serve as positioning aids.
4 To complete the cut, press the cutting head down and slide it along
the guide rail to the other side.
Note: To prevent a faulty cutting edge, do not run the cutting head
back again but remove the cut material directly after completing the
cut.
Cutting capacity: max. 3 sheets (80g/m²)
Cutting capacity: max. 3 sheets (80g/m²)
Cutting capacity: max. 3 sheets (80g/m²)
Fig. 4
17