Replacing The Blade - Olympia Vario duplex 4000 Manual Del Usuario

Replacing the Blade

The blade has four cutting edges (two on each side). When the quality of the
cut is no longer clean, turn the blade so that one of the unused cutting edges
will be used.
1 Slide the trimmer to one end of the guide rail.
2 Remove the blade out of the slot from the other side of the guide rail.
Recesses are provided for this at both sides of the guide rail (Fig. 6).
3 Turn the blade so that a cutting edge which has still not been used is
set to the working position and replace the blade back in the slot.
When all four cutting edges of the blade are worn, replace the blade.
Note: A spare blade is supplied in the storage compartment of the
guide rail (Fig. 7).
Fig. 6
19
Fig. 7