Assembling And Mounting The Switch Cup Assembly - Fanimation ASH LP8365LBI Manual Del Usuario

How to Assemble the Ceiling Fan
2. Remove and discard the motor stops from the
motor assembly by removing the screws. (Figure 2)
3. Secure the blade holders to the bottom of the motor
assembly using the 1/4 -20 screws. (Figure 3)
NOTE:
Periodically check blade holder hardware and
resecure if necessary.
!
To reduce the risk of personal injury, do not bend the
blade holders when installing, balancing the blades
or cleaning the fan. Do not insert foreign objects in
between the rotating blades.
Assembling and Mounting the Switch Cap Assembly
1. Disassemble the switch housing cover from
the switch housing adapter assembly by removing
screws and retain the screws for Step 5. (Figure 1)
2. Remove the three screws in the support bracket
and retain the screws for next step. (Figure 2)
3.
Assemble the switch housing
the housing support bracket using the previously
removed screws. (Figure 3)
WARNING
adapter assembly to
Blades (continued)
Motor Stops
Screws
(2 per assembly)
HARDWARE USED:
SCREWS
Switch Housing
Adapter Assembly
Motor Assembly
Switch Housing
Adapter Assembly
8
Motor Assembly
Figure 2
Blade Holder
Figure 3
x 10
Switch
Housing
Figure 1
Cover
Figure 2
Figure 3