Mounting The Fan Blades And Switch Cup Assembly - Fanimation The Involution FP4520 Serie Manual Del Propietário

Mounting the Fan Blades and Switch Cup Assembly

INSTALLATION NOTE
Do not connect fan blades until the fan is completely
installed. Installing the fan with blades assembled may
result in damage to the fan blades.
▲WARNING
To reduce the risk of personal injury, do not bend the
blades when installing, balancing or cleaning the fan.
Do not insert foreign objects in between the rotating
blades.
Blade Assembly:
1. Carefully slide the blade through the slot as shown.
(Figure 1)
2. Securely fasten the two blades with washer-head screws
with fiber washers. Do not over-tighten. (Figure 2)
Housing Switch Cup/Adapter Assembly:
3. Assemble the Switch Cup Adapter assembly on the
Housing Support bracket and tighten three screws.
(Figure 3)
4. Securely attach the 'color-matching' 9-pin switch cup
connector to wiring harness socket within Switch Cup
assembly. (Figure 4)
9
Fan Blade
Figure 1
Washer-Head
Screw with
Fiber Washer
(3 per blade)
Figure 2
Switch Cup
Adapter
Figure 3
Main Fan
Connector
Switch Cup
Assembly
Figure 4