Glacier bay 67536-1001 Guía De Instalación Y Cuidado página 7

Installation (continued)
8
Attaching the quick connector
to the receiving block
NOTE: The side of the control box (O) with "in" and "out"
showing must face the front of the cabinet (away from the
back of the cabinet).
□
Connect the hose with the yellow tag to the hose
on the control box (O) with a matching yellow tag.
Push rmly together until they snap into place.
□
Connect the hose with the green tag to the hose
on the control box with a matching green tag.
Push rmly together until they snap into place.
NOTE: If you want to use the faucet without the sensor
feature or without power, you can attach the quick
connector (1) to the receiving block (2). This bypasses the
sensor feature and enables the faucet to work by operating
the handle.
9
Installing the sensor cable
□
Install the data cable (1) to the control box connection (2). Ensure the arrows on the data cable (3) and the
control box connection (4) are aligned to one another to ensure proper installation. Ensure they are tightly
connected by rmly pushing together.
□
Secure the connection by hand tightening the nut (5) in a clockwise direction onto the threaded sensor cable.
CAUTION: If the connections are not made properly, the
sensor feature will not work.
1
3
1
4
2
7
Please contact 1-855-HD-GLACIER for further assistance.
1
5
Yellow
2
Yellow
O
Green
Green
HOMEDEPOT.COM