Klarstein 10030272 Manual De Instrucciones página 26

For the model 10031905
1. The cooker hood should be placed at a distance of 65-75cm
(26-30inch) from the cooking surface for the best effect.
2. Install the hanging screw on a suitable place once the instal-
lation height is fixed, and keep it in line. The fixed position
of the inside chimney bracket is the place of chimney. Also
install the safety hole in the wall. Total drill 8 holes and insert
the Wall plug. See Pic 2.
3. Hang the cooker hood on wall, See Pic 3.
4. Use 2 screws (4*30mm) to fix the safety locks in the cooker
hood on the wall. See Pic 4.
5. Put the inner chimney inside the outer chimney. Install the
outer chimney bracket on the outer chimney by two screws
(4mm x 8mm). See Pic 5.
6. Put the installed chimneys on the cooker hoods. Fix the out-
er chimney to the cooker hood by 2 screws (4*8mm), then
fix the outer chimney bracket to the wall by using 2 (4mm x
40mm) screws and wall plugs. See Pic 6.
7. Lift up inner chimney on the wall. Fix the inner chimney to
the inside chimney bracket by using 2 screws (4mm x 8mm).
The same operation to the outer chimney. See Pic 7.
Innenkamin
Außenkaminhalterung
Außenkamin
26