Comfort Glow ES4840 Instrucciones De Instalación Y El Manual De Propietario página 6

CONTROL PANEL
2 3 4 5 6 7
1
1. Main Power Switch
2. Thermostat control knob - Adjust to maintain room temperature (Cycles between 750 and 1500W)
3. Fan switch - Use alone for cool air or with heat settings
4. Heat switch – One switch for low heat setting (750 Watts)
5. Heat Switch - Two switches for high heat setting (1500 Watts)
6. Flame switch - Switches flame effect and power on/off
7. Flame dimmer control - Adjust to set flame intensity
OPERATING YOUR HEATER
1. Main Power Switch: Turn main power switch to on position.
2. Thermostat control knob: To adjust the temperature to your individual requirements, turn the thermostat
dial (#1) to the right (clockwise) to increase the desired temperature, or to the left (counter-clockwise) to
decrease desired temperature. This thermostat control dial can only be used while the FAN switch (#2) and
one or both of the 750W/750W (# 3 & 4) switches are in the "on" position. When the heater reaches the
desired temperature, the heater and one or both of the 750W indicator lights will turn off.
3. Fan: Use alone for "cool air" flow. Fan switch (#2) must be in the "on" position for heat settings to function.
4. 750W: For low heat function - Press 750W switch (#3) while the FAN switch (#2) is in the "on" position for
low heat. The indicator light will turn on.
5. 1500W:(Both 750W Switches) For high heat function Press second 750W switch (#4) while the FAN and (# 3)
switches are in the "on" position for high heat. The indicator light will turn on.
~ 6 ~