Publicidad
Idiomas disponibles
Idiomas disponibles
FOR MISSING PARTS, PLEASE CALL CUSTOMER SERVICE AT 1-800-913-8999
Step 2.
Attach one of the seal plates and venturi tubes
to the burner using two of the "M4x6mm"
bolts provided. Repeat this step for the
remaining seal plate and venturi tube. See
Illustration 2.
Step 3.
Attach the bracket to the extension tube using
one "M4x6mm" bolt and "M4" nut as shown in
Illustration-3. Repeat this step for the three
remaining brackets.
Step 4.
Attach the burner extension tubes to the burner,
one on each end, and slide the extension tubes
back and forth until the new burner is the same
length as the original burner. Secure the burner
extension tubes to the burner using the four snap
rings provided. See Illustration-4.
ASSEMBLY INSTRUCTIONS
UNIVERSAL PARTS
Adjustable H-Burner
(Assembled)
M4x6mm
Bolts
Snap Spring
Illustration-2
Illustration-3
Illustration-4
3
Publicidad
