Installation Instructions - Nexgrill 540-0002 Instrucciones De Installación

FOR MISSING PARTS, PLEASE CALL CUSTOMER SERVICE AT 1-800-913-8999
Step 1.
With the venturi tubes pointed down, lower
assembled burner in to the firebox of the grill.
LONG DISTANCE BETWEEN VALVE/BURNER
Step 2a. If the distance between the valve tip and the
venturi tube is short enough for a single 90° angle
bend in the venturi tube, attach the venturi tube
directly to the valve tip as shown in Illustration 5.
Using your thumb and index finger, gently grip
the flexible venturi tube on either side and
extend the tube until it can be attached securely
to the valve tip. Repeat this step for the
remaining venturi tube.
SHORT DISTANCE BETWEEN VALVE/BURNER
Step 2b. If the venturi tube is too long to enable the
installation as shown in Illustration 5, gently bend
the venturi tube to create a smooth "U" shape as
shown in Illustration 6. This may require stretching
the venturi tubes to fit properly into the firebox.
Using your thumb and index finger, gently grip the
flexible venturi tube on either side and extend the
tube until it can be attached securely to the valve
tip. Repeat this step for the remaining venturi
tube.
Step 3. After attaching the venturi tubes to the valve
tips, ensure that the burner is level.
Step 4 Using the spring, secure the venturi tube onto the
valve tip as shown in Illustrations 7 and 8. Repeat
this step for the remaining venturi tube.

INSTALLATION INSTRUCTIONS

Illustration-5
Illustration-6
Illustration-7
Illustration-8
4