Kohler K-2352 Guia De Instalacion página 6

Marker 3/8" (1 cm)
Threaded Stud
Bottom View
of Lavatory
Mounting Stud Holes
2. Install the Lavatory
CAUTION: Risk of personal injury or product damage. Marble
lavatories are very heavy. Get help lifting the lavatory into place.
Mark a spot 3/8" (1 cm) in on each threaded stud, as shown.
Thread the threaded studs into each of the four mounting holes
on the bottom of the lavatory. Do not tighten past the marked
points on the threaded studs.
Temporarily position the lavatory in the countertop cutout.
Inspect for proper fit.
Remove the lavatory, then place it upside down on a soft cloth.
Install the faucet according to the manufacturer's instructions.
Install the drain to the lavatory according to the drain installation
instructions.
Apply a thin continuous bead of silicone sealant around the flat
outside edge of the bottom surface of the lavatory.
Carefully position the lavatory in the countertop cutout.
1061995-2-A 6 Kohler Co.