Kobalt SGY-AIR86TZ Manual Del Usuario página 7

ASSEMBLY INSTRUCTIONS
5. Connect air tube intake connector from air
compressor and tighten, then set pressure to
29 PSI. Fully open the air adjustment knob and
adjust the spray pattern adjustment knob to proper
range. (See Figure 5.Not all accessories shown are
included)
6. Pour paint into paint cup. Hold or adjust paint cup
so that paint can be easily added and controlled
once into paint cup and secure paint cap lid by
screwing on by hand. (See Figure 6. Not all
accessories shown are included)
5
6
7
Spray Pattern Adjustment Knob
Fluid Adjustment Knob
Air Adjustment Knob
Load paint