REV 23030 Manual De Uso página 4

Alarm mute
In alarm systems with this feature, the alarm signal can be muted/switched off for about five (5) minutes.
Use this function only when you are absolutely sure that the alarm has been triggered by a known issue,
e.g. smoke during cooking or during heavy smoking of cigars or cigarettes in small spaces. To do so, press
the Mute button on the alarm system and the alarm will be suppressed for about five minutes. The alarm
will sound again after this period if the air still heavily charged with combustion substances. The mute
function can be used repeatedly. If you want to disable the mute function again after activation, press the
test button.
The mute function is not available when there is intense concentration of smoke!
Exchange/replacement of the alarm system
The alarm system includes a non-replaceable lithium battery. Under normal operating conditions, this
system will keep running for about ten (10) years. The alarm system is provided with battery capacity
detection. If the battery wears off, every 30-40 seconds a very audible „beep" sound will emitted. This
tone will be heard for at least 30 days. If this tone is emitted, the alarm system must be replaced by a new
device. Pull the battery switch on the side of the housing to interrupt the power supply before disposing of
the device.
This device contains reusable recyclable materials and a lithium battery. Do not dispose of the device in the
household waste but take it to a collection point for electrical appliances. Consult your local municipality to
find the nearest collection site.
Useful safety precautions
In certain situations, a smoke alarm system will not be effective in protecting against fire. For example:
smoking in bed;
ƒ
ƒ if children are left unattended in the house and have access to sources of ignition;
ƒ when working with flammable liquids (such as gasoline).
Installation and mounting
Your smoke alarm system is designed for easy installation on the ceiling. A full installation kit is supplied
with each smoke alarm system. First, hold the brackets on the ceiling and use a pencil to mark the 2 holes.
Use a drill to bore the holes and then attach the brackets to the ceiling using the screws provided.
On wood panelling or beams, drill a 20mm deep hole with a 2.5mm drill and secure the bracket with the
supplied screws.
In case of concrete or masonry, use a 5.5mm drill bit and drill a hole that is 25 - 30mm deep. Make sure
that the dowels hold in the drill holes; if not, find another location for the smoke detector.
Press the battery switch so that it is fully inserted in the case. The system is equipped with safety features
preventing the system from being attached to the bracket if the battery switch is not fully inserted. Remove
the locking pin from the mounting plate and place the smoke detector onto the mounting plate. Fix this by
turning until the stop on the mounting plate and insert the safety pin again.
After installation, examine all parts for proper installation and stable fit before checking if the smoke alarm
functions properly by pressing the test button.
WEEE-reference of disposal
In accordance with European defaults used electrical and electronics devices may no more be
given to the unsorted waste. The symbol of the waste bin on wheels refers to the necessity of
separate collection.
Please help with environmental protection and see to it that this device is given to the for this
purpose designated systems of waste sorting if you do not use it any longer.
GUIDELINE 2012/19/EU of the EUROPEAN PARLIAMENT AND the COUNCIL of July 04th 2012 about
electrical and electronics old devices.
Batteries and accumulators are not to be disposed of in the normal house waste bin. Every user is
legally obliged, to hand over all batteries and accumulators, irrespective of whether or not they
contain harmful substances to a communal collection point in the local town area or to a trade
dealer so that they can be disposed of in an orderly environmentally friendly manner.
Batteries and accumulators should only be handed over when they are completely discharged!
The warranty information does not apply to possibly provided or installed batteries.
Warranty
During manufacturing this REV product is passed through several quality testing stations which are set up
with newest technology. Should nevertheless a defect arise, REV offers a warranty to the following extent:
1. The duration of the warranty is 24 months after the date of purchase.
2. The unit is either repaired or replaced by REV free of charge or if it can be shown that it has become
unusable during the warranty period due to a manufacturing or material defect.
3. The liability does not cover transport damages or damaged incurred through defective installation.
4. If REV repudiates the warranty claim and no objection is made within 6 months, the right to repair
becomes time-barred.
5. In a warranty case the unit must be sent to the dealer or REV together with the sales slip and a short
description of the defect.
6. If there is no proof for a warranty liability being in place, any repair carried out will be invoiced.
We recommend to contact the service center. Your complaint will be accelerated so. To contact our service
center please keep product and type number of your product ready.
The declaration of performance is available at: www.rev.biz!
REV Ritter GmbH • Frankenstr. 1 - 4
Service-Telephone: +49 900 117-1070 • E-Mail: service@rev.biz • www.rev.biz
• D-63776 Mömbris