Plan The Installation - Zephyr ZRC-00LF Instrucciones De Instalación

CONTENTS
1 - Recirculation Box
1 - Recirculation Filter
1 - Decorative Grille
1 - Parts Bag (containing):
6 - #10 x .625" screws
4 - #8 x .375" screws
2 - #8 x 1" screws
INSTALLATION INSTRUCTIONS
2

PLAN THE INSTALLATION

IMPORTANT - Installation Requirements
The blower can be installed in either of two ways:
(1) attached to the downdraft and stabilized with
mounting legs.
(2) installed remotely (not attached to the downdraft),
using mounting brackets and wood framing.
Purchase blower separately. (Includes mounting legs and
mounting brackets.)
A minimum 24-inch wide cabinet is recommended.
The 8-inch round blower outlet and 8-inch round
recirculation box inlet must align vertically. (See page 2.)
1. Determine where recirculation box will exhaust through
cabinet.
• Front (toe space), Back, Side (Left or Right).
• 14½" x 15" opening in cabinet base is required for
recirculation box.
• 3½" x 14¼" opening is required for exhaust.
2. Determine location of recirculation box.
• Plan to align blower outlet with recirculation box inlet.
3. Determine what lengths of duct are required. (Purchase
duct separately.)
• A length of flexible or rigid 8" round duct is required to
connect blower exhaust to recirculation box inlet.
• A length of 3¼" x 14" duct may be required to connect
to exhaust of recirculation box and extend to decorative
grille location.
3½" x 14¼"
EXHAUST OPENING
DECORATIVE
GRILLE
EXHAUST THROUGH CABINET FRONT (TOE SPACE)
Model ZRC-00LF
FILTER
RECIRCULATION
BOX
OPENING IN
CABINET BASE
14½"
15"