Problem
No sound; receiver AF light and mic not lit
No sound but the AF lights are glowing
Received signal is noisy or contains
interference with transmitter on
Momentary loss of sound as transmitter is
moved around performing area
TROUBLESHOOTING
Make sure POWER switches in transmitters and
Check microphone battery to ensure they are providing
Check receiver's AC power connection
Make sure antennas are in the microphones' line of
If necessary, reduce the disance between the
Turn up the receiver's volume level controls
Check the proper connection between receiver and
Check microphone batteries or replace if power is low
Remove local sources of RF interference, such as
Use squelch control to reduce the interference
Reposition receiver and perform a "walkthrough" test
and observe the signal strengths. If audio droppouts
persist, mark these "dead spots" in the performing
areas and avoid them during the performance.
ENGLISH-16
Solution
receiver are set to ON positions
power
Replace the battery if necessary
sight
microphones and receiver
exernal amplifier / mixer
lighting equipment.