21"
(53.3 cm)
3-1/8"
(7.9 cm)
10-13/16" (27.5 cm)
3-1/2"
(8.9 cm)
Product Information
Drop-in rim style
Fixture*:
basin area
Bathing well
55-1/4" (140.3
cm) x 23-1/2"
(59.7 cm)
water depth
To overflow
15" (38.1 cm)
* Approximate measurements for comparison only.
Pump:
1-speed
Heater:
kW
1.5
Minimum access panel pump/control (2):
20" (50.8 cm) W x 15" (38.1 cm) H
Included Components:
Cutout template
1042018-1-B
4-3/4" (12.1 cm)
72" (182.9 cm)
3/8" (1 cm)
2-7/8" (7.3 cm)
3" (7.6 cm)
K-1164-H
shown
top area
64-1/2" (163.8
cm) x 32" (81.3
cm)
capacity
75 gal. (284.1 L)
V
Hz
A
120
60
7.5
V
Hz
A
120
60
12.5
required
1042557-7
No change in measurements if connected with
drain illustrated. (K-11677 or K-11677M)
Recommended faucet area
Pump/Control Access
19-1/2"
(49.5 cm)
21"
(53.3 cm)
1-1/2" OD
Required Electrical Service (2 required)
Two dedicated circuits required, each protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
weight
Heater
112 lbs.
Locate the outlets behind the whirlpool and within 24" (61 cm)
(50.9
of the pump and heater.
kg)
Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum of
37 lbs/square foot (178 kg/square meter) loading.
The suction line extends 4-3/4" (12.1 cm) beyond the edge of the
rim. The pump base extends 1/8" (3 mm) beyond the edge of the
rim. Modify the framing as needed.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
2
1-1/2"
(3.8 cm)
Drop-In Rim Detail
42" (106.7 cm)
120 V, 15 A, 60 Hz
120 V, 15 A, 60 Hz
Kohler Co.