Installation Instructions - GE JD630SFSS Instrucciones De Instalación

1 ­ R EMOVE PACKAGING MATERIALS
Failure­to­remove­packaging­materials­could­result­in­damage­to­the­appliance.­Remove­all­packing­parts­from­
oven,­racks,­and­heating­elements.­Remove­protective­film­and­labels­on­the­outer­door­and­control­panel.­
Also­remove­plastic­on­trims­and­panel­and­all­tape­around­the­oven.­Open­oven­door­and­remove­literature­
pack­and­oven­racks.­Remove­the­bottom­trim­from­the­side­of­the­oven.­It­will­be­installed­at­the­end­of­the­
installation­process.­The­trim­is­wrapped­separately­in­a­plastic­bag­which­will­also­contain­the­4­screws­to­
secure­the­bottom­trim­and­the­2­shoulder­screws­used­to­secure­the­product­to­the­cabinet.­
2 ­ P REPARING THE OPENING (FOR INDOOR USE ONLY)
Installation­Instructions
2
NOTE: Drop-In Ranges are designed to hang
from the countertop only. Do not install on a
platform or sup port rails.
Allow­30"­minimum­clearance­
between­surface­units­and­bottom­
of­unprotected­wood­or­metal­
cabinet.­Allow­a­24"­minimum­
when­bottom­of­wood­or­metal­is­
protected­by­no­less­than­1/4"­thick­
flame­retardant­millboard­covered­
with­not­less­than­No­28­MSG­sheet­
metal­(.015"),­.015"­thick­stainless­
steel,­.024"­aluminum­or­.020"­
copper.