Abbott ARCHITECT i RR-D2.04 Instrucciones De Sustitución página 2

Removal (continued)
Remove the
Refrigerator
Temperature Sensor
1.
2.
3.
4.
Replacement
Install the Refrigerator 1.
Temperature Sensor
2.
©1998 by Abbott Laboratories
Abbott Park, IL 60064
Note Use caution when removing the
screw; it is not secured to the
refrigerator temperature sensor.
Locate the refrigerator temperature sensor. [1]
Disconnect the refrigerator thermistor cable
W100 REFRIG THERM from the temperature
sensor. [2]
Use the # 1 screwdriver to remove the screw
(non-captive) holding the sensor to the
barcode reader bracket. [3]
Remove the sensor from the module.
Place the sensor onto the reagent barcode
bracket and install the screw. [1]
Note Orient the sensor so the sensor
cable is next to the connector.
Connect the refrigerator thermistor cable
W100 REFRIG THERM to the temperature
sensor. [2]
RR-D2.04 SENSOR, TEMP, REFRIGERATOR
ABBOTT ARCHITECT™ i System Removal & Replacement Procedure
2 - 3
1
3
2
AMA-3177
1
2
AMA-3178
ABBOTT ARCHITECT™ is a
trademark of Abbott Laboratories.
78154-102