Setting Up Your Microphone System - Dynex DX-M1114 Guia Del Usuario

6

Setting up your microphone system

The following illustration shows two basic ways to connect your receiver
to an amplifier.
Receiver
Audio mixer
Karaoke amplifier
Note: When you install the receiver, make sure that it is at
least 10 feet (3 meters) off the floor and at least 10 feet (3
meters) away from surrounding walls.
To set up the receiver:
1 Place the receiver on a flat, stable surface.
2 Fully extend the antenna, and make sure it is perpendicular
to the receiver.
3 Plug one end of the audio cable into the AUDIO OUT jack on
the receiver.
4 Plug the other end of the audio cable into the MIX IN or
AUX IN on an external amplifier.
Setting up your microphone system
Amplifier
Speaker
Speaker