Safety information
•
Careful consultation of this manual before installation and use is essential. Continual observance of the
indications found in the manual guarantee personal and machine safety.
•
Never tamper with safety devices for any reason.
•
Strict observance of the work safety regulations issued by the responsible organisations in each country
is strongly recommended.
•
The manufacturer is not liable for damages to persons or things due to the neglect of safety regulations.
•
Correct machine placement, illumination and cleanliness are important conditions for personal safety.
•
Do not expose the machine to the elements.
•
Machine connections and start-up must only be performed by specialised technicians.
•
Make sure that the system specifications of the room where the machine is installed correspond to the
information printed on the plate.
•
Make sure the machine is connected to a grounding system.
•
The work area around the machine must always be kept clean and dry.
•
Use the garments foreseen by work safety regulations.
•
This machine must only be used for its specific purpose; any other use is considered improper and
therefore hazardous.
•
Check the suitability and weight of products to be processed; do not overload the machine.
•
Introducing objects, tools, hands or other within hazardous parts is forbidden.
•
Keep the machine away from children.
•
Disconnect the power cord from the electrical socket when the machine is not in use.
•
In the event of malfunctions and/or problems, do not attempt to repair the machine.
authorised dealer.
•
Use original spare parts.
•
Before cleaning the machine, disconnect the power supply by unplugging the machine.
•
Do not clean with high-pressure jets of water.
Residual risks
In accordance with point 1.7.2 "Residual risk warnings" in Machine Directive 98/37 and further amendments,
please note that the safety guards, constructed in accordance with said Directive, do not completely
eliminate burning risks to upper limbs.
GENERAL
INFORMATION
Contact the
1