Important Features; Inserting Batteries - Revell Control DIGGER 2.0 Manual De Usuario

24924
Safety instructions:
• Before using for the first
time, make sure that you
have read and understood the
entire manual.
• Please keep the manual and
packaging as they contain important
instructions.
• The user should only operate this
model in accordance with the
instructions for use in this operating
manual.
• This model is suitable for pilots who
are at least 8 years of age. Parental
supervision is required when driving it.
• Warning! Not suitable for children
under 36 months. Small parts.
Choking hazard!
• This model is suitable for use indoors
and in dry outdoor areas.
• Keep your hands, face and loose
clothing away from the model during
operation.
• Switch off the transmitter and model
when they are not in use.
• Remove the batteries from the
transmitter and the model when they
are not in use.
• Always maintain visual contact with
the model in order to avoid losing
control of it. Inattentive and careless
use can lead to considerable damage.
• Do not operate the model near people,
animals, roads or bodies of water.
• This model is not suitable for people
with physical or mental limitations.
We recommend that people who are
unfamiliar with transmitter models
operate the model under the guidance
of someone with experience.
• A model should never be operated
under the influence of drugs or alcohol.
• This vehicle may not be used on public
roads!
12

IMPORTANT FEATURES

6-channel excavator with 2.4 GHz
transmitter
• Main arm, forearm and bucket can be
controlled separately
• high traction track drive
• With sound module
• In general, it must be ensured that
the model cannot injure anyone in
consideration of potential malfunctions
and defects.
• The model may only be repaired or
modified with genuine Revell control
spare parts. Otherwise, the vehicle
can be damaged or pose a danger. In
order to prevent risks, always operate
the model from a position which
provides an easy line of retreat, if
necessary.
Transmitter safety instructions:
• Rechargeable batteries must be
removed from the transmitter or the
model prior to recharging.
• Non-rechargeable batteries may not
be charged.
• Rechargeable batteries may only
be charged under the supervision of
an adult.
• The combination of different types of
batteries as well as new and used
batteries must be avoided.
• Only recommended batteries or those
of an equivalent type may be used.
• We recommend new alkali manga-
nese batteries for the transmitter.
Single-use batteries for this transmit-
ter and other electrical devices
operated in the home can be
replaced with environmentally-friendly
rechargeable batteries.
• Batteries must be inserted according
to the correct polarity (+ and -).
• Depleted batteries must be removed
from the transmitter.
• The connection terminals may not be
short-circuited.
• Remove the batteries from the
transmitter and model if they are not
to be used for an extended period of
time.
Maintenance and care:
• Please only use a clean, damp cloth to
wipe down the model.
• Protect the model and batteries from
direct sunlight and/or direct heat.
• Never allow the transmitter to come
into contact with water, because the
electronics can be damaged as a
result.
• Technical changes and differences in
colour reserved!
Technical data
Rechargeable battery
for the model:
Power supply: ===
Rated output: 1x DC 7,2 V / 400
mAh / 2,88 Rechargeable NiMH
battery (included)
USB charger:
Power supply: DC 5V via USB port,
500 mA or higher
Rated output: 5 V / 1000 mA max.
Batteries for the
transmitter:
Power supply: ===
Batteries: DC 3 V /
2 x 1,5 V "AA"
(not supplied)
1 VEHICLE
1A Bucket 1G OFF/ON switch
1B Forearm 1H Upper bolt
(round)
1C Main arm
1I Lower bolt
1D Superstructure
(square)
1E Battery
compartment
1F Battery com-
partment latch
2 TRANSMITTER
2A Left throttle 2H Forearm down
2B Right throttle 2I Bucket up
2C Rotate super- 2J Bucket down
structure
2K Demo button
anti-clockwise
2L Light/sound
2D Rotate super-
ON/OFF
structure
2M Record button
clockwise
2N ON/OFF switch
2E Main arm up
2O Power LED
2F Main arm down
2G Forearm up

3 INSERTING BATTERIES

3A Unscrew and remove cover
3B Insert 2 x 1.5 V AA batteries and pay
attentiontothepolarityspecifica-
tions, as indicated in the battery
compartment.
3C Close the battery cover and secure
with the screw.
13