Important Features; Remote Control; Inserting Batteries - Revell Control X-Razor Next Manual De Instrucciones

23977

IMPOrTaNT FeaTUreS

Micro helicopter:
• New coaxial rotor system with electronic
gyro for outstanding flying properties
• Sturdy plastic hull
Safety instructions:
• This helicopter is only suitable for use
indoors and not for use outdoors.
• This helicopter is suitable for pilots who
are at least 15 years of age. Adult
supervision is required when flying it.
• Keep your hands, face, hair and loose
clothing away from the rotor.
• Switch off the remote control and
helicopter when they are not in use.
• Remove the batteries from the remote
control when it is not in use.
• Always maintain visual contact with the
helicopter in order to avoid losing
control of it.
• We recommend new alkali manganese
batteries for the remote control.
• As soon as the remote control no
longer functions reliably, new batteries
should be inserted.
• Please keep this operating manual safe
for later use.
• The user should only operate this
helicopter in accordance with the
instructions for use in this operating
manual.
• Do not fly the helicopter near people,
animals, bodies of water or power lines.
• The charger for the Li­ion battery is
specially designed for the charging of
the helicopter battery. The charger may
only be used to charge the helicopter
battery, not other batteries.
12
• Integrated rechargeable Li­ion
battery (lithium ion)
• Multi­colour LED lighting effects on
the fuselage and tail assembly
Maintenance and care:
• Please only use a clean, damp cloth
to wipe off the helicopter.
• Protect the helicopter and batteries
from direct sunlight and/or direct
heat.
• Never allow the helicopter to come
into contact with water. This may
result in its electronics becoming
damaged.
Remote control battery safety
instructions:
• Non­rechargeable batteries may not
be charged.
• Rechargeable batteries must be
removed from the remote control
prior to recharging.
• Rechargeable batteries may only be
charged under the supervision of an
adult.
• The combination of different types of
batteries as well as new and used
batteries must be avoided.
• Only recommended batteries or those
of an equivalent type may be used.
• Single­use batteries for this remote
control and other electrical devices
operated in the home can be
replaced with environmentally-friendly
rechargeable batteries.
• Batteries must be inserted according
to the correct polarity (+ and -).
• Depleted batteries must be
removed from the remote control.
• The connection terminals may not
be short-circuited. Please remove
the batteries from the remote
control if it is not to be used for an
extended period of time.
The helicopter is equipped
with a rechargeable lithium-ion
battery. Please observe the
following safety instructions:
• Never throw Li­ion batteries into a
fire or store in hot places.
• Only use the supplied charger
integrated in the remote control for
charging.
• When disposing of batteries, they
must be discharged or their
capacity must be fully depleted.
Cover exposed terminals with
adhesive tape in order to prevent
short-circuiting!
Safety instructions:
• The product may never be
structurally modified. This may
lead to it becoming damaged or
posing a danger.
• Avoid the risk of danger by never
operating the aircraft while sitting
on the ground or in a chair.
Operate the aircraft from a
position that allows easy evasion
if needed.
• Always switch off the aircraft and
the remote control after use.
Otherwise, it is possible for the
model to be unintentionally
started.
Required batteries for the
helicopter:
Power supply: ===
Batteries: 1 x 7.4 V rechargeable
Li-Ion battery (integrated)
Capacity: 600 mAh / 4,44 Wh
Charger:
Power supply:
AC 100-240 V, 50–60 Hz
Rated output: 10 V / 1000 mA
Battery requirement for the

remote control:

Power supply: ===
DC 6 V
Batteries: 4 x 1.5 V "AA"
(not supplied)
1 helICOPTer
1A Stabiliser 1D Landing skid
1B Counter-rotating 1E Tail rotor
rotor blades
1F ON/OFF switch
1C Search
1G Charging cable
headlamp
1H Side rotors
2 reMOTe CONTrOl
2A Power LED 2D Power ON/OFF
2B Controller for 2E Up/Down thrust
forward/back- controller
ward flight and
2F Banking button
flying left/right
for left
2C Left/Right trim
2G Banking button
adjustment
for right
knob

3 INSerTINg BaTTerIeS

(reMOTe CONTrOl)
3A Unscrew and remove the cover.
3B Insert 4 x 1.5 V AA batteries and pay
attention to the polarity, as shown in
the battery compartment.
3C Close the battery cover and secure
with the screw.
13