Connecting Via Bluetooth - Samsung EO-SG900 Manual De Usuario

Notices for using Bluetooth
• Ensure that your device and the other Bluetooth device are
within the maximum Bluetooth range (10 m). If there are
obstacles between the devices, the operating distance may
be reduced.
• Ensure that there are no obstacles between your device
and the connected device, including human bodies, walls,
corners, or fences.
• Do not touch the Bluetooth antenna of the connected
device.
• Bluetooth uses the same frequency as some industrial,
scientific, medical, and low voltage equipment and
interference may occur when connecting via Bluetooth near
these types of equipment.
• Some devices, especially those that are not tested or
approved by the Bluetooth SIG, may be incompatible with
your device.

Connecting via Bluetooth

1
Turn on the Bluetooth speaker. Then, press and hold the
Pairing ( ) button for about three seconds.
• The speaker enters the Bluetooth pairing mode and the
Power button flashes red, blue, and green.
2
On the Bluetooth-enabled device, access the Bluetooth
setup mode and search for Bluetooth devices.
3
From the search results, select the Bluetooth speaker.
• When pairing is complete, the speaker appears as
"Connected" in the devices list.
7