Beper MD.500 Manual De Instrucciones página 6

Pasta machine Use instructions
Manual accessories
1. Stretching rollers
2. Cutter rollers for fettuccine
3. Cutter rollers for tagliatelle
Fitting accessories Fig.B
Before each use: follow the instructions given in the "Cleaning and maintenance" paragraph. Set the pasta ma-
chine near the edge of a stable working surface suitable to bear its weight, insert the clamp in the clamp housing
slot, tighten screw until the machine is firmly clamped to the resting surface.
Connect the required accessory to the retainer fins provided on the machine.
Insert the handle provided in the slot found on each accessory.
This procedure is the same for all the manual accessories shown on this page
Use of cutters rollers
Before each use: follow the instructions given in the "Cleaning and maintenance" paragraph.
Rest one end of the sheet obtained previously on the cutter rollers, insert the handle in the slot of the device and
turn clockwise to obtain the cutting action.
Cleaning and maintenance
Before each use
Thoroughly clean the machine with a dry cloth or soft brush.
After fastening the machine onto a stable and suitable surface, cleaning can be completed passing a piece of
dough through the stretching rollers and cutter rollers (to remove any remaining dust). Of course, the dough used
for this purpose must be thrown away.
Never wash any part of the machine and its accessories in a dishwasher or with water and detergents. Do not
use sharp objects to remove any dough residue. Absolutely avoid using knives or other utensils to put the dough
between the machine rollers.
After each use
Never use sharp objects to remove any remaining dough. Never wash any part of the machine and its acces-
sories in a dishwasher or with water and detergents. Make sure that all the components are perfectly dry before
storing them.
Warning! This item is not a toy. Do not leave it unattended and keep it out of the reach of children.
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice
6