JOVY Systems Jetronix-Eco Guia De Inicio Rapido página 9

Quick Start Up Guide
6- Process Profile
- Profile from machine memory, from PC or just
parameters for one time use.
- Process stages options
1. Press Start process and set up the process configuration then
press OK.
2. Set the Process Graph Parameters. Enable Time to
Temperature indicator, Time Scale in minutes or seconds and
number of thermocouples to be displayed .
3. The Process Profile ends when the last stage complete
(Thermocouple reading value is equal to the last stage set
temperature and its dwell time passed), or by pressing Stop.
4. The Process Profile Graph could be saved during the process
running or after the process ends by pressing.
9 Jovy Systems® Limited
Jetronix-Eco