EN
12
OPERATION OF THE CONTROL UNIT
Note: The control unit is intended for outdoor use in gardens and on
balconies. It can be mounted on the wall or plugged into the floor.
How it works
You can set the controller to water and humidify your flowers and plants early
in the morning or late at night when the water evaporates least. The control
unit will water your garden and flower boxes fully automatically according to
the program you set. This way you can ensure that your plants are watered
even when you are on holiday.
Display
•
The [Watering Time] window
displays how long the pump is
running. The numbers 10-50
stand for 10-50 seconds. H1-H9
for 1-9 minutes.
•
The [Interval Time] window
displays the time intervals.
HH means every 12 hours, the
numbers 1-15 stand for every
1-15 days.
Status of the control lamp on the control unit
•
The indicator light flashes slowly (every 10 seconds): The control unit has
been programmed.
•
The indicator light flashes quickly: The pump is working.
•
The indicator light lights up continuously: The control unit is waiting for
programming.
•
The indicator light illuminates red: The battery is empty. The pump stops
and waits until the batteries are recharged. As soon as the batteries are
charged, the indicator light illuminates green.