Verify Existing Utility Connections; Water Connection; Electrical Connection - Midea MDT24H3AST Manual De Instrucciones

VERIFY EXISTING UTILITY CONNECTIONS

WATER CONNECTION

1.
Check that the water line reaches to the front, left-hand side of
opening where the water connection will be made as shown in the
following diagram.
(7.6 cm to 12.1 cm)

ELECTRICAL CONNECTION

Electrical Connection to Dishwasher
1.
Check that the direct wire cable extends a minimum of 6" beyond the
front, right-hand side of the opening, and is routed as shown.
If the water line and the direct wire cable reach far enough to easily
connect to the dishwasher, proceed to the next section "Install Mounting
Brackets."
16
If the water line and the direct wire cable do NOT reach far enough, follow
the instructions under "When There Are No Existing Utility Connections."
water
line
3" to 4 ¾ "
direct
wire
6" (15.2 cm)
¾
3" to 4 "
(7.6 cm to 12.1 cm)