ENGLISH
1. Press the "PROG" button once; the word
"CLOCK" is displayed on the upper right
corner of the screen.
2. Press the HOUR and MIN buttons several
times to adjust the current time (real time),
specifically 17:10 (see Image 1).
Note: The clock is displayed in 24-hour time.
3. Press the "PROG" button once; the word
"TIMER" is displayed on the upper left
corner of the screen.
4. Set to a delayed start time (20:15) by pressing
the HOUR and MIN buttons several times
(Image 2).
5. Press the Standby button twice and the
green light will turn on. The current time
will appear on the display. To display the
automatic start time, press the PROG button.
Note: You can cancel the automatic start
function by pressing the Standby button
once to turn the appliance off, or press the
GB-12
Standby button twice to start the brewing cycle
immediately. To modify the automatic start time,
repeat steps 1 to 5 above only.
At the set time, the green light goes out, the
red light comes on and the appliance begins
the brewing cycle. The appliance switches off
automatically 40 minutes after the end of the
brewing cycle if you have not switched it off
manually.
TIPS FOR A TASTY COFFEE
1. A tasty coffee is the result of a clean coffee
maker. Regularly clean the coffee maker
as indicated in the "CLEANING AND
MAINTENANCE" chapter. Always use
clean and cold water in the coffee maker.
2. Store the unused ground coffee in a cool,
dry place. After opening a packet of ground
coffee, close it carefully and keep it in the
refrigerator so that the coffee stays fresh.
ENGLISH
GB-13