Motorola Solutions PMMN4089 Manual Del Usuario página 6

68012008093_PMMN4089.book Page 4 Wednesday, May 15, 2013 2:56 PM
INSTALLATION
Mounting the Hang-Up Clip, HLN9073
Figure 2. Hang-up clip HLN9073
Refer to Figure 2. Once an installation
location has been decided, perform the
following steps:
1. Verify that the selected mounting surface
is strong enough to support the mounting
hardware and the microphone.
2. Use the base of the hang-up clips as a
template to center punch and drill two
3mm (1/8") diameter holes. Be careful
not to damage any wires or any other
vehicle components when drilling the
Hang-up clip
Self tapping
screw
4