Handle Positions; Care & Maintenance - Chicco Rodeo Manual De Instrucciones

Join the front part to the rear part of each rocking base. Insert the Chicco brand into the central hous-
ing, then turn the base to tighten the 2 screws into their housings, as shown in the diagram. Ensure
the screws are tightened firmly and safely into position.
HOW TO USE THE TOY
Diag. 6
The system connected to the handle allows you to adjust the strength with which the horse moves
forward while "galloping", based on the child's weight. In position 1 (approximate weight of the child:
up to 13 kg), the system adjusts the movement of the horse with respect to the average strength of a
push by a child, during that age. Positions 2 and 3 follow the phases of the child's growth, and there-
fore adjust the movement of the horse on the basis of the child's strength.

HANDLE POSITIONS

POSITION 1: For children of up to 13 kg of weight.
POSITION 2: For children from 13 kg up to 16 kg of weight.
POSITION 3: For children of over 16 kg of weight.
The weights indicated above are only provided for reasons of reference and are therefore only indica-
tive. Regardless of the position of the handle and of the child's age or weight, the toy will always be
safe to use.
BLOCK POSITION: This position should be used when the horse is in the rocking mode or when the
child wishes to use it only as a classic riding toy (that is, when the child wishes to move the toy forward
without activating the "galloping" mode).
Diag. 7
When the toy is in the "ROCKING" mode, turn the central handle to the "block" position. Place the
horse onto the rocking bases, ensuring that the joints of the wheel correspond with the upper hous-
ings of the rocking bases. Press each of the 4 wheels, until a click is heard, indicating that the wheel is
correctly locked into position. Ensure that each wheel is safely locked into position to avoid that the
toy may overturn.
Diag. 8
When the toy is in the "RIDING" mode, remove the rocking bases exercising some pressure, and then
turn the central handle to the desired position of use (see diag. 6).
WARNING:
CHOKING HAZARD - Small Parts
MUST ONLY BE ASSEMBLED BY AN ADULT
CARE & MAINTENANCE
• Clean the toy with a soft dry cloth to prevent the risk of damaging the electronic circuit.
• Handle the toy with care and protect it from heat, dust, sand, humidity and water.
• When replacing damaged or worn components, only use original spare parts.
• Long exposure to sunrays could cause the fading of the plastic parts of the toy. This is normal and
does not jeopardise the safety of the product.
Made in Czech Republic
11