Charging The Battery - AVM FRITZ!Fon M2 Guía Rápida

Charging the Battery

Connect the power supply unit to the charging cradle.
1.
Plug the power supply unit into an outlet and place the
2.
FRITZ!Fon in the charging cradle.
Registering with the Base Station
To switch on FRITZ!Fon, press and hold down the End Call
1.
key
The display shows "Press and hold down DECT button on
the base station!".
Press the "DECT" or "Registration" button on your base
2.
station. Press and hold the button until FRITZ!Fon requests
a PIN or is successfully registered.
If the PIN of the base station is requested, enter the PIN and
3.
press "OK".
In all FRITZ!Box models the PIN is preset to "0000".
FRITZ!Fon is registering with the base station.
FRITZ!Fon M2
.
16