emco Woodcore Serie Guia De Instalacion

Installation Kit Guide
for EMCO® Woodcore Series Door
with Mortised Handle Set
Do not return product to store!
PLEASE call the Storm Door Solution Center at 1-800-933-3626,
with any questions regarding installation, lost part replacement, or anything else related to your purchase.
#6
Read this entire guide before you begin your installation. If your abilities do not
match the requirements of this installation, contact an experienced contractor.
3/4" Machine Pan Painted
PARTS OVERVIEW
Your installation kit should contain the following parts. However, in some door models, not all of the parts will be used.
1-1/4" SMS Pan
Exterior handle with spindle
A
Interior handle
B
#8
Exterior trim plate
C
D Interior trim plate
1/2" SMS Pan
Lock case with trim plate
E
F Striker plate
1/2" SMS Pan Painted
#8 x 7/8" machine screw, Painted (2)
G
#8 x 3/4" flat head screw (2)
H
1/2" SMS Flathead
#8 x 1/2" flat head screw (4)
I
Nylon washer (2)
J
1/2" Self-Drill Pan
Hex wrench, 3/32"
K
1/2" Self-Drill Pan Painted
SAFETY FIRST: Please read and follow all cautions and warnings in this guide.
3/4" Machine Flathead
WARNING
Entry door hardware and handle may become hot when
7/8" Machine Pan Painted
exposed to sunlight.
WARNING
1" SMS Pan
Improper use of hand or power tools could result in injury
and/or product damage. Follow equipment manufacturer's
1" SMS Pan Painted
instructions for safe operation. Always wear safety glasses.
1/2"
1" Machine Pan Painted
RECOMMENDED TOOLS
1"
1-1/2" Machine Flathead
1/8" drill bit
#10
1-1/2" Machine Flathead
2" SMS Pan Painted
#6
3/4" Machine Pan Painted
1-1/4" SMS Pan
#8
1/2" SMS Pan
1/2" SMS Pan Painted
1/2" SMS Flathead
1/2" Self-Drill Pan
1/2" Self-Drill Pan Painted
3/4" Machine Flathead
Metal fasteners and other hardware components may corrode when exposed to preservative treated and fire-
7/8" Machine Pan Painted
retardant treated lumber. Obtain and use the appropriate size stainless steel fasteners and hardware as called
out by the installation guide to fasten unit to any rough opening made from pressure treated and fire-retardant
treated lumber. Failure to use the appropriate materials for the installation may cause a failure resulting in injury,
property or product damage.
1" SMS Pan
1" SMS Pan Painted
1" Machine Pan Painted
1-1/2" Machine Flathead
Drill/driver
#10
Emco Enterprises LLC, is a wholly owned subsidiary of Andersen Corporation. Emco
1-1/2" Machine Flathead
manufactures and supports the limited warranties for Andersen® and EMCO® doors.
"Andersen", "EMCO" and all other marks where denoted are trademarks of Andersen
Corporation. ©2017 Andersen Corporation. All rights reserved.
2" SMS Pan Painted
2
1-1/4" SMS Pan
3
#8
4
1/2" SMS Pan
5
1/2" SMS Pan Painted
6
NO 1
1/2" SMS Flathead 7
1
1/2" Self-Drill Pan
9
2
1/2" Self-Drill Pan Painted
B
A
3
10
4
3/4" Machine Flathead
11
5
E
12
7/8" Machine Pan Painted
6
13
7
1" SMS Pan
H
14
8
1" SMS Pan Painted
9
K
1" Machine Pan Painted
12
1-1/2" Machine Flathead
13
WARNING
14
#10
1-1/2" Machine Flathead
2" SMS Pan Painted
#12
Screwdriver
5/8" SMS Pan Painted
!
!
1
C
F
G
I
15
INTERIOR VIEW
VISTA INTERIOR
VUE DE L'INTÉRIEUR
EXTERIOR VIEW
VISTA EXTERIOR
VUE DE L'EXTÉRIEUR
Safety Glasses
!
Andersen SDD, PO Box 853
Des Moines, IA 50306-0853
!
Rev 1-2017 16004 Print in Color
p/n 625220
D
J
i
=
VIEW
X
=
VIEW