Drilling Distances - Covering A Larger Surface; Covering A Larger Surface - Combining Elements - sigel. Sound Balance Indicación De Montaje E Indicación De Uso

4.4 Drilling distances – covering a larger surface
Below you can see the required vertical and horizontal drilling distances for covering a large sur-
face with a gap of 10 mm.
800x400
Fig. 6 Drilling distances for all formats incl. a 10 mm gap – all measurements in mm
Measurements from the centre of the drilled hole to the edge of the product, or from the centre of one drilled
hole to the next.
4.5 Covering a larger surface – combining elements
The formats of the acoustic boards have been carefully coordinated. This means that all formats
can be combined, making them ideal for covering a larger surface.
To create the best visual effect, we recommend mounting several acoustic boards with a gap of
10 mm between them.
Please note that this recommended gap of 10 mm between the boards is required if you wish to
use the SIGEL accessories on the acoustic boards. The necessary vertical and horizontal drilling
distances for mounting with a 10 mm gap are shown in the illustrations in section 4.4 "Drilling
distances – covering a larger surface".
Without this minimum space between the boards, the magnetic accessories cannot be inserted
into the gaps.
Please note
`
`
`
Examples of possible combinations for creating a larger surface of boards
All measurements include the recommended 10 mm gap.
80x40
120x40
Total surface area 201x81 cm
80x40
80x40
120x40
Total surface area 201x122 cm
Fig. 7 Possible combinations for creating a larger surface of boards
Sound Balance acoustic board
800x400
620
800x400
We recommend that, before mounting, you make a sketch of your intended combi-
nation of elements, calculate the total weight and mark out the outer dimensions
of the overall surface on the mounting site.
During the mounting process, use a spirit level to check that each acoustic board
is straight.
When mounting several elements, always work from bottom right to top left.
Always mount the complete bottom row of acoustic boards first from right to left
and then continue with the next row. Please note that the elements cannot be
mounted in a different order due to the insertion system of the mounting rail.
120x40
120x81
80x40
Total surface area 443x81 cm
80x40
120x81
120x81
80x40
Total surface area 403x122 cm
1200x810
820
1200x400 / 1200x810
80x40
120x40
120x40
80x40
120x40
1200x400
1020
1200x400 / 1200x810
120x40
120x81
80x40
80x40
120x81
80x40
80x40 80x40
19