Husky HDUFL50 Manual Del Usuario página 2

GENERAL SAFETY RULES
UNPACKING
FEATURES
OPERATION
LOADING CLEAT NAILS
LOADING STAPLES
UNLOADING CLEAT NAILS AND STAPLES
CHANGE THE FOOT PLATE
ADJUSTING THE FRONT FOOT
SETTING THE AIR PRESSURE
OPERATING THE TOOL
CLEARING JAMS
MAINTENANCE
RECOMMENDED HOOKUP
TROUBLE SHOOTING
WARRANTIES
WARNING:
The warnings and precautions discussed in the manual cannot cover all possible conditions and
situations that may occur. It must be understood by the user that common sense and caution are
factors which cannot be built into this product, but must be supplied by the user.
SAVE THIS MANUAL
Keep this manual for the safety warnings,
precautions, operations, inspections and
maintenance. Keep this manual and the
receipt in a safe and dry place for future
reference.
SYMBOLS
●
Some of the following symbols may be used on this tool. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.
' : To reduce the risk of injury, user must read and understand operator's manual
Read operator s manual
before using this product.
Risk to hearing: Always wear ear protection when using this tool. Failure to do so may result in hearing loss.
Eye protection: Always wear safety goggles safety glasses with side shields or a full face shield when
.
operating this product
Risk of serious personal injury: Never place hands or any other body parts in the fastener discharge area
of the nailer. The tool might eject a fastener and could result in death or serious personal injury.
02
WARNING:
!
To avoid serious personal injury, do not
attempt to use this product until you read
the manual thoroughly and understand it
completely. Save this manual and review
frequently for continuing safe operation
and instructing others who may use this
, ,
WDH100401AV-S 10/10
● In this manual, on the labels, packages and all other information provided with this tool. The following
P3
signal words and meanings are intended to explain the levels of risk associated with this tool.
P5
P5
SYMBOLS
!
P6
P6
!
P6
P6
P7
GENERAL SAFETY RULES
P7
IMPORTANT SAFETY INSTRUCTIONS
P8
INSTRUCTIONS PERTAINING TO A RISK OF
P8
FIRE, ELECTRIC SHOCK, OR INJURY TO
PERSONS
P9
To reduce the risks of electric shock, fire, and injury
P10
to persons, read all the instructions before using the
tool.
P11
P12
WARNING:
!
When using tools, basic precautions
should always be followed, including the
following:
CALIFORNIA PROPOSITION 65
WARNING:
!
This product or its power cord may
contain chemicals known to the State
of California to cause cancer and birth
defects or other reproductive harm.
Wash hands after handling.
WORK AREA
Keep the work area clean and well lighted.
Cluttered benches and dark areas increase the
risks of accidents.
Do not operate the tool in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust. The tool
creates a spark which may ignite flammable
liquids, gases or dust.
Keep bystanders, children, and others away
while operating the tool.
result in improper use and cause injury.
SIGNAL MEANING
Indicates a potentially hazardous situation, which, if not avoided,
WARNING:
could result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided,
CAUTION:
may result in minor or moderate injury.
(Without symbol) Indicates a situation that may result in
CAUTION:
property damage.
Avoid unintentional misfires. Always use
caution to avoid accidentally firing. Do not point
towards yourself or anyone whether it contains
fasteners or not.
PERSONAL SAFETY
Always wear eye protection.
others in the work area should always wear
ANSI-approved safety goggles with side shields.
Eye protection is used to guard against flying
fasteners and debris, which may cause severe
eye injury. You can use the goggles packed with
the tool.
Always wear hearing protection when using
the tool.
noise may cause hearing loss.
Use safety equipment. A dust mask, non-skid
safety shoes and a hard hat must be used for the
applicable conditions. Wear a full face shield if
you are producing metal filings or wood chips.
Dress properly.
jewelry. Contain long hair. Keep your hair,
clothing, and gloves away from moving parts.
Loose clothes, jewelry, or long hair can be
caught in moving parts.
Avoid unintentional starting.
switch (hammer cap) is off before connecting to
the air supply. Do not carry the tool with your
finger on the switch (hammer cap) or connect the
tool to the air supply with the switch (hammer
cap) on.
Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use tool while tired or under the influence
of drugs, alcohol, or medication. A moment of
inattention while operating the tool may cause
serious injury.
Do not overreach. Keep proper footing and
balance at all times.
Distractions could
enables better control of the tool in unexpected
situations.
Operator and
Prolonged exposure to high intensity
Do not wear loose clothing or
Be sure the
Proper footing and balance
03