Steren STV-048 Manual De Instrucciones página 5

HOW TO INSTALL THE WALL BRACKET
1.- Locate the place where you want to install the monitor.
2.- Place the wall bracket over the wall, and mark where you
need to drill holes for a secure installation.
3.- Then, insert the anchors in the holes.
4.- Place the wall bracket over the holes and insert screws and
washers, make sure to tight them fi rmly.
5.- Next step is to assemble the movement and fastening bars.
6.- Insert the fastening bar into the movement bar.
7.- Insert the screws to join and fasten the movement and
fastening bars (to place this screws, it is necessary that both
holes are aligned). Finally place the butterfl y nuts in each screw.
ENGLISH-5