Publicidad
Enlaces rápidos
Publicidad
Manuales relacionados para West Elm adams tall chest
Resumen de contenidos para West Elm adams tall chest
- Página 1 Parts/Pièces/Herrajes...
- Página 2 Anti tip kit 2x Nylon Strap 2x Mounting Plate 4x Small Screw 4x Large Screw 4x Kit anti chavirement – 2x Kit para evitar que voltee Bretelle en nylon – x2 Cinta de Nylon 2x Plate de montage - x4 Placa de montaje 4x Vis petite x4 Vis grande x4 Tornillo Pequeño 4x Tornillo Largo 4x...
- Página 4 Drawer Construction repeat for all 4 drawers: 1. Screw in 2 small cam bolts (B) into back of drawer fronts. 1. Vissez 2 petites vis à came (B) sur la surface arrière de la façade des tiroirs. 1. Inserte 2 pernos pequeños (B) en la parte trasera del frente de las gavetas.
- Página 5 3. Slide drawer bottom into grooves on drawer sides and front. Align drawer back like shown. 3. Glissez le panneau du fond dans les rainures du panneau latéral droit et gauche. Alignez le panneau ar rière du tiroir comme illustré. 3.
- Página 6 5. Attach handle (E) to drawer front using screw (F). Tighten with screwdriver. 5. Fixez une poignée (E) sur la façade du tiroir en utilisant des vis (F). Serrez-les à l’aide d’un tournevis. 5. Anexe manilla (E) al frente de la gaveta utilizando perno (F).
- Página 7 6. Locate the 2 end panels and lay them onto a clean smooth surface such as carpet or cardboard. Insert dowels (J) into ends of end panels as shown. Insert screws (M) into drawer guides as shown. Locate the rails (#4) and (#5). Insert dowels (J). 6.
- Página 8 7. Insert large cam bolts (B) into top panel. 7. Insérez les gros boulons à came (B) dans le panneau supérieur. 7. Inserte pernos (B) en el panel superior. 8. Insert cam lock (G) into the rails. Align the rails (4 & 5) along with panel (6) with the end panel. Press rmly together.
- Página 9 9. With help, align bottom panel (6), and the other end panel (2) over the dowels and cam locks. Press rmly together. Turn the cam locks with the provided hex key 180 degrees until they lock the rails into place. Align the bottom leg supports (L) an insert screws (J).
-
Página 10: Care Instructions
11. Insert drawers bottom rst. Align with drawer guides on side panels. 11. Insérez les tiroirs inférieurs en premier. Alignez- les avec les glissières situées sur les côtés. 11. Inserte las gavetas inferiores primero. En le con las guías en los paneles laterales. CARE INSTRUCTIONS Hardware may loosen overtime. - Página 11 back side wall NOTICE: To prevent injury and property damage from unexpected tipping of furniture, we highly recommend installa tion of the anti-tip kit included with this product. Attaching furniture to wall with anti-tip kits. 1. Determine where the piece is to be placed and mark location on the wall for the mounting bracket screw holes. They should be placed approximately 1”...