Before using your new USB enclosure, please read this
Before using your new USB enclosure, please read this
instruction manual to prevent any damage. Put it away in a
instruction manual to prevent any damage. Put it away in a
safe place for future references.
safe place for future references.
IMPORTANT
Before to manipulate the HDD, use an anti-static bracelet to
send electric discharges from your body to the physical ground.
Be careful when you connect the cables, pins may bend and
break.
Do not use or store the equipment near wet places.
Clean only with a soft, dry cloth.
PACKAGE CONTENT
•
One USB IDE 3.5" Hard Disk enclosure
•
One AC power adaptor
•
One power cord
•
One USB cable
•
Driver software
•
One screwdriver
CONTROLS
1
1. IDE cable
Connect the IDE cable to the HDD
2
2. Energy cord
Connect the energy cord to the HDD
3. USB connector
3
Connect the USB cable
4
4. Power Supply
Power supply connector
5. On / Off
5
Turn on / turn off the device
ENGLISH-2