Preparing The Tub; Installing The Piping; Warnings - Pomd'or UNIQUE Instrucciones Para La Instalación

6 PREPARING THE TUB
• Remove the tub from its pack and dispose of the latter according to local by-laws.
• Place the tub in its installation position and keep it clear from the floor using wooden blocks.
• Install the drain kit on the tub as shown in Fig. 3, following the instructions of the manufacturer of
the drain kit.
2
7 INSTALLING THE PIPING
CAUTION:
Risk of injury. Taps mounted on the edge of the tub that can inadvertently be used as a means of support
are not appropriate or safe for this operation.
CAUTION:
Risk of damage. Make sure gaskets are applied to all the drain connections.
• Connect the trap to the plug surround as per the drain kit manufacturer's instructions.
• Open the hot and cold water taps and check all the connections for leaks.
• Fill the tub with water and check the drain connections for leaks.
• Fill the tub to the overflow and check for leaks.
• Remove the wooden blocks and apply silicone around the base of the tub.
8

WARNINGS

• This tub must not be used by people with impaired physical, sensory and/or cognitive capacities
(including children) or those not possessing the notions required to use it. Make sure that children
are monitored by a person responsible for their safety.
• Pomd'or tubs have been designed for domestic or similar use and must only be installed and used
indoors at room temperature.
• It is dangerous to use them in the vicinities of electrical appliances (radios, hairdryers, ...).
• Take special care when using the tub on your own: remaining in the water for a long time could
cause nausea, dizziness and fainting.
• do not use the tub after taking medicines or other substances that could cause drowsiness or alter
your blood pressure.
• Never use water at temperatures higher than 40 °C.
1
5
4
3
6
Fig.3
EN-15