How To Adjust - Chicago Faucets RETROFIT MVP T-183 Instrucciones De Instalación

C) Time is changed by rotating plastic serrated adjustment nut
with a pair of pliers. Raising nut (counter clockwise) shortens
time, lowering nut (clockwise) lengthens time.
(Figure 4)
D) After each adjustment, replace handle and check cycle time.

HOW TO ADJUST

DECREASE
TIME
E) Once cycle time is satisfactory, lock handle in place making
sure set screw is securely fastened on groove in stem.
(Figure 5) If a type 665 handle is used, remember to insert the
colored index button.
NOTE: A variation from cycle to cycle should be expected. It is
best to wait until hot water is available and the building as in use
before making final adjustments.
Some new installations may produce a slight closing noise. This
is normally the result of air trapped in the unit and the noise will
dissipate over time.
TOP VIEW
INCREASE
TIME
BUTTON
SET SCREW
FIGURE 5
ADJUSTING NUT
FIGURE 4
665 HANDLE
ACTUATOR
5