Philips Norelco S9733/90 Manual De Instrucciones página 24

24
English
2
1
1
2
Repeat this process for the other retaining
rings. Place them aside in a safe place.
5 Remove the shaving heads from the
shaving head holder. Each shaving head
consists of a cutter and guard.
Note: Do not clean more than one cutter
and guard at a time, since they are all
matching sets. If you accidentally put a
cutter in the wrong shaving guard, it may
take several weeks before optimal shaving
performance is restored.
6 Clean the cutter and guard under the tap.
7 Shake off excess water.
8 Put the cutter back into the guard.
9 Place the shaving heads in the shaving
head holder.
Note: Make sure the notches on both sides
of the shaving heads fit exactly onto the
projections in the shaving head holder.
10 Reattach the retaining rings.
- Blue retaining ring: Place the retaining ring
on the shaving head and turn it clockwise to
reattach the retaining ring.