Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Getting to Know Your Electric Kettle
Product may vary slightly from illustration
Lighted ON/OFF Indicator Switch
Before Using for the First Time
1. Boil a kettle of water following the Operating Instructions described in this
Instruction Manual.
2. Discard the boiled water. Your kettle is now ready for use.
Operating Instructions
CAUTION: Do not immerse power base, power cord, or plug in water or any
other liquid.
1. Position the power base on a stable, level surface near an electrical outlet.
Unwind the power cord from the cord storage area located beneath the
power base. Make sure the cord exits through the cord exit slot on the side
of the power base.
2. Check that the ON/OFF switch is in the OFF (up) position.
3. Remove the kettle from the power base. Pull back and lift up on the handle
to open the lid. Fill with fresh, cold water to the desired level. Use the water
level indicator under the handle. Add water but do not fill above the MAX
water level. Wipe excess water off the kettle.
CAUTION: Never add water above the MAX water level. This could cause
boiling water to splatter out. NOTE: If the kettle is accidentally switched
ON without sufficient water, a boil-dry protection device will automatically
turn the unit OFF. (See Boil-Dry Protection explanation in this Instruction
Manual.)
086_KS Plastic 1.7L kettle R1.indd 6
Lid Release Button
Hinged Lid
Spout Filter
Handle
Water Gauge
Power Base
Cord Exit Slot (other side)
3 Prong Plug (not shown)
Spout
1.7L
MAX
1.5L
1.0L
0.5L
MIN
2019-11-12 2:45 P
Publicidad
Tabla de contenido
