Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
kettle as they may damage the surface.
1. Make sure the kettle is unplugged and completely cool.
2. Grasp the handle and remove the kettle from the power base. If necessary,
wipe the inside and outside of the kettle with a soft, damp cloth and
wipe dry.
3. Wipe the power base with a damp cloth.
4. Make sure both the power base and kettle are completely dry after cleaning
and before use.
Cleaning the filter
The filter is located just behind the spout.
Before removing or assembling the filter, switch the Kettle off and empty it.
Allow it to cool completely then unplug the power base from the outlet.
Filter removal and reassembly
1. Ensure the kettle is cold. Open the lid and lift the filter out using the flap
at the top of the filter. You will hear an audible click when you lift the
filter upwards.
2. Remove the filter out of the kettle.
3. Rinse the filter in warm water and gently remove any scale with
a soft brush.
4. To reassemble, place the filter back into the filter holder ensuring the filter
is facing the correct way.The flap on the filter should face towards the lid of
the kettle. Push the filter into position until you hear an audible click.
Descaling
NOTE: Mineral deposits can form a scale coating inside the kettle and may
cause an off flavor in the water or lengthen the boiling time.
1. Several descalers are available. Follow the instructions provided.
2. As an alternative, use the white vinegar cleaning method:
In a spouted bowl, prepare a descaling solution of 3 cups white vinegar and
2 cups cool, clean water; pour into kettle. Do not boil the solution, as it may
damage the kettle.
Allow the solution to soak in the kettle overnight.
Discard the cleaning solution. Fill the kettle with cool, clean water; boil,
discard, and rinse thoroughly.
Repeat this procedure several times until the vinegar odor is gone.
3. Use a damp cloth to remove any stains remaining inside the kettle.
Storing Instructions
1. Make sure unit is unplugged and completely cool before storing.
WARNING: Never store the electric kettle while it is hot or still plugged in.
2. Wrap the power cord around the cord storage area under the power base to
store. Store kettle with lid closed.
3. Store the kettle in its box, in a clean, dry area.
086_KS Plastic 1.7L kettle R1.indd 8
2019-11-12 2:45 P
Publicidad
Tabla de contenido
