Grill Master 720-0894A Manual De Instrucciones página 21

8. Side Burner Shelf Assembly
a) Loosen but do not remove the
screw which is pre-assembled on
the outside firebox, right. As
shown in Fig. 20.
b) Attach the side burner shelf to the firebox, right. Secure
from inside of the firebox by using three 1/4"x12mm black
screws (AA) and ¼" flat washer
hardware pack. As shown in Fig. 21.
c) Align the hole on the side burner shelf
bracket with the loosened screw located on
the outside firebox and tighten. As shown in
Fig. 22.
d) Secure the side burner control panel and main control
panel by using two 5/32"x10mm black screws(BB) which
are in the hardware pack. As show in Fig. 22
(HH) which are in the
Fig. 20.
Fig. 21.
Fig. 22.
21