Standard Functions Setup; Internal Value / Battery Voltage; Piece Weight Auto-Average - Gram SC2 Manual De Utilización

Piece weight memory key.
Input piece weight using the 0 – 9 keys, then press this key to memorize
and press the keep where you want to save it, for exemple:
Press this key to select the PLU (M01 – M09) and press again to select the
PLU (M11 – M18)
Press this key to clear the piece weight window.
Press this key to display the total accumulation count, total accumulated
weight and total count.
To clear accumulation data, press and hold this key until buzzer beeps
twice.

STANDARD FUNCTIONS SETUP

To access to functions setting, press and hold the
The weight window will show UF-1, press the
desired parameter (UF-1 to UF-8)
UF-1 Internal value / battery voltage
1. Press the
2. Weight window will show the internal value (SPAN), piece weight window will show
the actual battery voltage and the total count window will display the the internal
value (ZERO).
2. Press the
UF-2 Piece weight auto-average
1. Press the
2. The display will show the message A A U G
3. Use 0 and 1 keys to enable or disable the auto-average function.
4. Press the
5. Press the
key to enter.
key to exit.
key to enter.
key to confirm.
key to exit.
key, then press the
key or key to select the
1 (factory default).
8